Low Pressure Transmitter in Short and Compact Design

brief description

The pressure transmitters of the SIS type series are designed for low pressure ranges from 10 mbar to 40 bar, like the SIL. In addition, it is characterized by its short and compact design of max. 50 mm in length and can therefore also be integrated in a narrow space.

Due to the proven modular design, most common signal types can be offered and a wide variety of electrical and mechnical connection variants can be used.

product characteristics

  • small design ~ max. 50 mm in length
  • low pressure ranges available (as low as about 10 mbar)
  • great flexibility for mechanical and electrical interfaces
  • usable for non-aggressive gases or oils
  • withstand high pressure pulse cycles

technical data

pressure range:
0-10 mbar up to 0-40 bar / 0-0.15 PSI up to 0-580 PSI
max over pressure: max 50 mbar (for 10 mbar)/ 100 bar (for 40 bar)*
min burst pressure: min 150 mbar (for 10 mbar)/ 150 bar (for 40 bar)*
output signals: 4-20 mA, 0-20 mA, 0-10 V, 0-5 V, 0.5-4.5 V ratiometric
response time [10-90%]:
≤1 ms (3-wire output signal)*
accuracy: 1.0% F.S. *
working temperature range (media): -40 ... 85°C / -40 ... 185°F
working temperature range (ambient): -40 ... 85°C / -40 ... 185°F
material of parts in contact with media:
silicon measuring chip, NBR-, FKM- or silicone O-ring, aluminium
material of housing: stainless steel **
shock resistance (according IEC 68-2-32): 1000g
IP class (according IEC 60529): up to IP6K9K (depending on electrical connection & mating)
weight: 80 - 120 g
minimum pressure cycles: 1*106
   
*for more information see data sheet
** others on request 
( for all parameters the specific datasheet applies )