Pressure Switches

  Model Name / Description Data sheet
SML 2 DS5 Electronic Pressure Switch
The pressure switch DS5 combines the advantages of the series SML with the switch functionality.
Due to the usage of a 14bit (15bit optional) electronic it is possible to achieve a high accuracy at the set/reset points. The internal use of digital values enables the switch to work in very dynamic systems as well as in regular assemlby lines (e.g.). The max. frequency to measure is about 1kHz. The switch option is adoptable for any pressure range from 600mbar to 2000bar or even up to 6000bar.
The components used alowes the DS5 to work in applications with up to +125°C (257°F) for the media and max. +105°C (221°F).
Special configuration such as SKE-Type would allow higher Temperatures for the media up to +200°C

The DS5 available with factory-set configuration and as DS5P also as a field-programmable version.

switch options:
  • normally open
  • normally closed
  • window function
  • accuracy at switch setpoint below 0,3%
  • high active
  • low active

A PC Software and programming adapter for in-field configuration is available.
Download
DPSX 2 DPSX9I Intrinsically Safe Electronic Pressure Switch with current output
The pressure transmitter consists of a detached measuring cell, which can be installed within an area exposed to explosion hazards, and evaluation electronics.
  • 0...5 mbar up to 0...2000 bar
  • -40...100°C (-40...212°F) media
  • 0,50 (1,00) % accuracy at room temperature
Download
DPSX 2 DPSX9U Intrinsically Safe Electronic Pressure Switch with voltage output
The pressure transmitter consists of a detached measuring cell, which can be installed within an area exposed to explosion hazards, and evaluation electronics.
  • 0...5 mbar up to 0...2000 bar
  • -40...100°C (-40...212°F) media
  • 0,50 (1,00) % accuracy at room temperature
Download