High Precision Pressure Transmitter

brief description

The flexible SHP has been designed for challenging tasks of measuring and control. With an accuracy of <0.15% and a high signal stability, it is very precise.

The zero point of the transmitter can easily be reset, e.g. if the mounting position changes and the zero signal deviates. This allows an offset correction to be made at any time. 

Also possible is the change of many parameters, e.g. measuring range, reaction time on site at the application from the customer with a service toolbox and PC.

The SHP has a robust design and guarantees a high level of reliability and safety even in very rugged conditions. It is used in many areas where precision is required and / or difficult ambience conditions exist.

product characteristics

  • precision <0.15 %FS (optional 0.1 %FS)
  • resetting and new zero adjustment
  • fully welded construction
  • high chemical / media compatibility by the use of stainless steel
  • high rate of pressure cycle widthstand

technical data

pressure range:
0-1000 mbar (0-14,5 PSI)/ 0-2000 bar (0-29.000 PSI)
max over pressure: ≤ 250 bar: 2 facher Nenndruck / > 250 bar: 1,2 facher Nenndruck
min burst pressure: ≤ 250 bar: 3 facher Nenndruck / > 250 bar: 1,5 facher Nenndruck
output signals: 4-20 mA, 0-10 V, 0-5 V, 0.5-4.5 V ratiometric
response time [10-90%]:
≤4 ms
accuracy: 0.15% F.S. 
working temperature range (media): -20 ... 85°C / -4 ... 185°F
working temperature range (ambient): -20 ... 85°C / -4 ... 185°F
material of parts in contact with media:
stainless steel, silicon
material of housing: stainless steel
shock resistance (according IEC 68-2-32): 1000g
IP class (according IEC 60529): up to IP6K9K (depending on electrical connection & mating)
weight: ~ 120 g
minimum pressure cycles: 1*106
   
( for all parameters the specific datasheet applies )
( for detailed information on technical data see the specific datasheet )