Pressure transducers for standard industrial applications

brief description

The Series SML is the basic product for most ADZ products.

Due to its modular design with a fully welded stainless steel membrane (all Material in contact with the measured media is 17-4PH) and its adoptable electronics, the SML is the optimal substructure for pressure transducers for industial applications. All pneumatic and hydraulik systems can be equiped with the SML pressure transducer.

Pressure ranges from 0 to 1 bar relative or vacuum measurement of -1...0 bar or any ranges up to 1000 bar can be individually selected - or standard ranges can be used. Our production capability starts at 1 piece per order / lot. Standard ranges such as 10 or 250 bar are as easy as specified ranges of 0 to 11.5 bar or 4.5 to 324.2 bar.

product characteristics

  • fully welded construction
  • high chemical / media compatibility by the use of stainless steel
  • high rate of pressure cycle widthstand

technical data

pressure range:
up to 1000 bar / 14.500 PSI (higher ranges see SMH series)
max over pressure: 2 times nominal pressure 
min burst pressure: 3 times nominal pressure
output signals: 4-20 mA, 0-10 V, 0-5 V, 0.5-4.5 V ratiometric
(CANopen, J1939 see SMC)
response time [10-90%]:
≤1 ms
accuracy: 0.5% F.S. 
working temperature range (media): -40 ... 125°C / -40 ... 257°F
working temperature range (ambient): -40 ... 105°C / -40 ... 221°F
material of parts in contact with media:
stainless steel 1.4301 / 1.4305 / 1.4542
material of housing: stainless steel 1.4301
shock resistance (according IEC 68-2-32): 1000g
IP class (according IEC 60529): up to IP6K9K (depending on electrical connection & mating)
weight: 80 - 120 g
minimum pressure cycles: 1*106
( for all parameters the specific datasheet applies )
( for detailed information on technical data see the specific datasheet )